Categories
Break This Glass

Microcontroller | 2

You have arrived at this page using the Microcontroller | 2 card.

It is understood that you have already run the tests on the Microcontroller | 1 card and the result has been successful. Otherwise, we suggest you to start there.

Here, we will guide you through running a second group of tests on the Arduino MKR WiFi 1010 microcontroller.

The back of the card presents a list of checkboxes for you to verify:

  1. Checkbox 1: The board can run a modified program
  2. Checkbox 2: The board can run a custom program

The following sections will help you to verify those steps.

Table of Contents

  1. Introduction (you are here)
  2. The board can run a modified program | page 2
  3. The board can run a custom program | page 3
  4. Final notes | page 4