Categories
Break This Glass

Microcontroller | 1

You have arrived at this page using the Microcontroller | 1 card.

Here, we will guide you through running the first tests on the Arduino MKR WiFi 1010 microcontroller.

Note that the terms microcontroller and board refer to the same component.

Single-board Microcontroller: Arduino MKR WiFi 1010

The back of the card presents a list of checkboxes for you to verify:

  1. Checkbox 1: The board is not plugged into a circuit
  2. Checkbox 2: The board is getting power
  3. Checkbox 3: The board can run a basic program

The following sections will help you to verify those steps.


Table of Contents

  1. Introduction (you are here)
  2. The board is not plugged into a circuit | page 2
  3. The board is getting power | page 3
  4. The board can run a basic program | page 4
  5. Final notes | page 5